Capabilities
Mechanical design, CNC machining, sheet-metal fabrication, welding, surface finishing, and quality control — six capabilities owned by one team.
Book a callDesign
Drawings ready for the floor — done by engineers who will be on the shop floor when the part is built.
CNC machining
Production runs and one-off parts in steel, aluminium, brass, and stainless. Tooling and fixtures designed alongside the part.
Sheet metal
From single brackets to large enclosures and frames, with consistent bend radii and clean joints.
Welding & fabrication
Welded with documented procedures and trained welders. Stress-relieved when the application calls for it.
Surface finishing
Pre-treated, masked, and finished to your spec — not just sprayed on. Colour and texture controlled.
Quality control
100% inspection on critical dimensions, calibrated instruments, and inspection reports tied to the batch.
Materials
Sourced from vetted suppliers with traceable mill certificates. Common stock kept on the floor; specials on request.
Sheet, plate, bar — aerospace and structural
Sheet, sections, fasteners
Sheet, plate, structural sections
Tooling and fixtures
Aerospace and high-strength parts
Bar stock, bushings, components
Pre-galv sheet and tube
Delrin, nylon, UHMW, HDPE on request
Tolerances and standards
General machining
±0.05 mm
Tighter on request; called out on the drawing where it matters.
Sheet metal forming
±0.5 mm
Standard bend tolerance; tightened with formed-feature tooling.
Surface finish (machined)
Ra 1.6 µm
Standard. Finer finishes available with secondary operations.
Welding
WPS-led
Documented procedures, qualified welders, visual inspection on every joint.
Powder coat thickness
60–80 µm
Measured with calibrated coating thickness gauge on each batch.
Inspection records
Per batch
Tied to the batch ID and retained, available on request.
Send a drawing or a sketch. We will tell you what is feasible, what we'd change, and what it costs.
Book a call