3 min read
Cold winding — the DFM decisions that cost you most often
Most cold-wound spring and wire-form rejections trace back to a small number of avoidable design and process decisions. Here's what to watch.
2 min read
What "100% inspection" actually means (and what it doesn't)
Every shop says they do 100% inspection. Here's what that should actually mean — and the questions worth asking the next time you see the phrase on a quote.
2 min read
Why we powder coat by default (and when paint is still the right call)
A note on why most of our parts go to powder coat instead of wet paint, and the small set of cases where paint still wins.
2 min read
Sheet metal or machining? A practical guide for picking the right process
A short, opinionated guide to choosing between sheet metal fabrication and machining, with the trade-offs we see most often on the shop floor.
2 min read
DFM — the 30-minute review that pays for itself
Design for manufacturability is not a buzzword. It's a 30-minute conversation between your designer and our shop that often saves 20% of the part cost.
2 min read
5 things to send with a quote request (and 1 thing not to)
A short checklist of what to include when you send us a drawing — so we can come back fast with an accurate quote instead of a list of questions.